Contact Us

   We have a full service machine shop to help you with your needs big or small. We look forward to helping make that much needed progress on you project or that repair to get you back on the road. 





98 Woodman Hill Road
Minot, ME, 04258
United States


Deep Six Cycles is a small grass roots chopper shop specializing in the manufacture and modification of motorcycles and motorcycle parts. All of our products are made right here in the U.S.A.


Filtering by Tag: Brass grips

A New Home For a New Little Lane Splitter!

Tom Bowie (Deep Six Cycles)

  The raffle bike has a new home, can you believe it? It will be on it's way to V.A. shortly! We would like to thank every one who has helped us with this raffle. This raffle never would have happened with out partnering with East End Moto/Flying Chairs to make it happen. They  supplied the bike and a slew of other help and support while we worked together to make this happen. Butt's Chop Shop came threw with a bad ass donated paint job! The Burger Bar, Lazy Diamond & The Double Crown sold the heck out of tickets as did a few of our friends. Hard Drive sponsored our efforts and kicked down some parts for the bike. And of course special thanks to every one else who worked behind the scenes to help us out with this whole deal. We are really looking forward to handing a check to Richard Page to help out with the hospital bills from when he went down this winter/fall.

 Check out this short video I made if you could not make it to The Melt Down in Hendersonville where we held the drawing. We had a great time seeing old friends and making some new ones. Come check out The Melt Down next year if you are in the area! Those Ton Up Highlands guys put on a heck of an event! 


New, Old, Awesome!

Deep Six Cycles

We have been cranking out the same old awesome while adding some new products too! Check out the new kicker mod we are offering for XS650s! Send us your kicker and we can hook it up to match the other pegs we offer! We know you have been having a hell of a time finding a cool XS650 kicker pedal and pegs, we got ya covered...

Oh Yeah we still do awesome in brass too...

Carnage and the Beast! Oh wait, I mean beauty!

Deep Six Cycles

If you have not been paying attention to our posts on other social media you may not have realized that I managed to completely decimate the sprocket cover on my Ironhead Sportster chop.

Here is the carnage! Opps!

I was going to construct a whole new mount/ sprocket cover. But since I just wanted it done so I could ride I buzzed it back together. Hopefully this winter I will be able to get around to ordering up some material and fabbing one up!
Oh and this is just another one of those slammed mornings getting everything shipped out! 

Deep Six Cycles Stainless Rabbit Ears and more!

Deep Six Cycles

I made these bars the other week. I still have a set for sale. Polished 1" Stainless Steel Rabbit Ears with Polished manually machined brass pressed on. 3.5 mounting pattern. $285 plus shipping for this pair. Email Or check out our online store for more info!
  Deep Six Cycles Polished Stainless and brass Rabbit Ear Handlebars photo IMG_20141029_124455_zpsf1515723.jpg photo 20141029_124054_zps3c0fe710.jpg

 Oh and we can hook you up with pegs for those funky Ironhead and Shovel mounts! Brass Foot Pegs for Ironhead Sportsters and Shovelheads by Deep Six Cycles photo IMG_20141015_080615_zpsda79c5ce.jpg

We have been selling quite a few of our brass products with and antiqued finish. See those pegs on the left? Brass Foot Pegs and Shift Knob by Deep Six Cycles photo IMG_20141015_074322_zpsb91c0484.jpg

And these antiqued foot pegs and hand grips. Brass Handgrips and Foot Pegs by Deep Six Cycles photo IMG_20141015_071248_zpsd955418b.jpg

Here are a set of Brass Hexogram Pegs, Brake peg and Grips with a special custom spin.  photo 20141017_163611_zpsbce65f89.jpg

Just a good ole week. Never meanin no harm...

Deep Six Cycles

What have we been up to? Well, really just settling into the new shop with East End Motorsports. Setting up the new spot, arranging, organizing and turning out products.

We still ship Iron Pony Express from time to time.

Wait, could it be? Brass Pegs that fit Ironhead Sportsters and Shovelheads? That's it man, we have them you want them!

Did I mention that we have 1" Brass Foot Pegs for Iron Head Sportsters and Shovelheads? You know the ones you can't get nice pegs for any where. They fit those big ugly male frame mounts!

Here are a whole set of antiqued or "aged" brass hand grips and footpegs! I bet you didn't know we offered so many types of finish on our products.

Here are a few more shots of the pegs. This has been a much requested finish on our brass products lately!  

Here we have our antiqued finish brass pegs on the right with common Harley style mounts on the left. One of our polished brass jockey/suicide shift knobs in the center and our brass "Screw It" footpegs fitted with mounts for Ironhead and Shovelhead Harleys.

Did you know that we still manually machine our parts? I know it's like the 50's never ended!

Some times we get requests to produce a part based on one we offer already but with a little twist to fit our customers needs or taste. Take this set of Deep Six Cycles Hexogram brass handgrips. They feature a double hex on one end.

Yes I know only old guys do it this way. Finishing up more parts and they are gone, gone, gone!

I was forced to go down town the other day... Strangely The Cobblers Shoe (my bike) didn't have anything to do with my morning in traffic court.

Shots in the dark.

Deep Six Cycles

I find myself shooting photos of things. Some of the time these things make it to instagram or various other forms of social media, often times they are posted one place and never make it to the blog. Here are a few photos from last week. I tend to take a lot of the shop stuff for granted just because I see it every day and never think to shoot it. There are probably a lot of missed opportunity's.     

This clutter of the day is a bunch of material in different stages of machining, or just finished.

Here is the finished bore for a set of brass grips with a Joker Machine throttle tube being test fit. P.S. they run a bit small.

These would be our finished Brass Grips with the Joker Machine Throttle tube installed

Just an ole handle bare fixture.

Just the ole splitting of an ole handle bar fixture.

And this ole pic of my ole bike "The Cobblers Shoe"